澳利国际Request for Instructions and Report Format for th

时间: 作者:下运

   The above text refers to the request or report submitted to the State Council.. The head of his writing should be set aside in Meishou District for the leaders of the State Council to sign COMments, so Meishou District is larger than the general document. This format requires that the eyebrow head area of the general the form of an official document be moved down 55mm to ensure that the name of the issuing authority is 80mm from the edge of the center of the plate..

   Since the upper document should be signed by the person-in-charge of the document authority, and the signature position is on the same horizontal line as the document number, the document number of the document authority cannot be placed in the middle position, and should be moved to the left to the left edge of the center of the document with an empty one-word position mark.. The person-in-charge and his signature shall be marked with an empty word on the right edge of the plate center.. The name of the issuer shall be in 3# italics.. The issuer and the issuer's name are separated by colons.. If there is a combination of several units in the above or the following text, the format is the same as that of the upper and descending article. In the same way, the name column of the issuing authority shall list the names of multiple authorities in sequence, and then add the word "document" and place it in the center.. If there are too many joint writing units, attention should be paid to ensure that the first page has a text. If there is no guarantee, the name of the issuing authority will have to be reduced.. In the joint writing, the host organ should be listed first.. The signatures of the unit leaders are aligned with the names of the organs in the joint writing.. At this time, the red reverse line moves down.

   A number of units jointly write articles, and the number of articles issued is only one, that is, the number of articles issued by the organizer..

   Descending article's joint writing does not need to identify the name of the issuer and the issuer, so its document number should be listed in the middle..

   The main area includes columns such as document title, main sending organ, text, accessories, seal of the issuing organ, written date, notes, etc..

   Official document title marks are symmetrically marked at the center of the empty two-line position under the red reverse line.. If the title has too many words, it can be divided into one line, two lines or three lines. Small standard song typeface with font size 2 is adopted.

   Title identification generally includes three elements, namely, the name of the issuing authority, the reason and the language. Among them, the name of the issuing authority may be omitted from time to time except for the "request for instructions" text which requires strict identification.. The name of the issuing authority shall be marked with full name or standardized abbreviation.. The subject matter of the official document should 澳利国际 be highly summarized into a concise paragraph to explain the main points of the full text.. The script shall be marked according to the 13 documents specified in the new Measures..

   When identifying the title, attention should be paid not only to the beauty and symmetry, but also to the fact that the words in the title should not be separated from the quoted title, name, number, etc.. In addition to quoting Guillemet or political terms, punctuation marks are generally not required in titles..

   The main sending organ is also the receiving organ. To identify the full name or standardized abbreviation of the authority. The identification of the main delivery authority shall be one line below the title, with the top mark on the left, followed by a colon.. If there are too many main delivery agencies, care must be taken to ensure that there is text on the front page.. In this case, its main delivery organ may mark several in this column, and add brackets to indicate that the rest of the main delivery organs are to be sent to edition mark, and then place the rest of the main delivery organs at edition mark, with the mark on the line "CC".

   The text is marked with two characters to the left of the next line in the main delivery office (Meiwen. COM. cn). The text requires concise and clear words, correct and general words, and two empty words at the left of each paragraphs.

   The numbers in the text shall be marked with Arabic numerals, and all units of measurement shall be metric units of measurement.. However, when identifying the ordinal numbers in the words, the digital identification is still in Chinese capital letters.. For example, words such as "up and down", "colorful" and so on.

   Seal official document effective identification. But pay attention to anti-counterfeiting when printing. In addition to the anti-counterfeiting of ink, the sealing position of the seal is very important, requiring that no additional content is allowed between the seal and the text, thus controlling the sealing within 3 ~ 5 mm between the seal and the text.. Since this position is difficult to master, it can be sealed within the word spacing range of the next line in the text.. In this way, it is not easy to add text to the text to ensure anti-counterfeiting.. In addition, it is required that the seal must be stamped on the written time, that is, the seal should be stamped on the words written on the day of the month of the year to prevent blank seals.. (责任编辑:admin)

推荐图片Related

相关文章Related

查看更多热门新闻

首页 | 最新网址 | 游戏玩法 | 最新动态

Copyright © 2018-2019 安信娱乐 版权所有

网站地图 | RSS订阅 | 安信娱乐